How To Repair The Hydraulic Hose With Hydraulic Hose Crimping Machine

Hydraulic hoses are used in many industries and equipments,when the problem happend with the hoses in hydraulic system,normally the problem is leaking oil.The best method to solve the problem with leaking is change a new hose.You could save your money and get more knowledge about hydraulic If you replace the hose by youself,anyway,here is one available solution for changing the hydraulic hose.

First you need to find the leaking location,it is better to clear a clean and dry area,pressurize the hydraulic system,you will see the location where leaking the oil.Don’t touch it by your hand in case unexpected result.

When you confirm the location,then you should release the pressure of the system.Turn off the hydraulics and accumulator to avoid the hydraulic oil spraying.

Now you have two solutions,if you see the hose are not been broken,try to tighten the fittings,it is the connection of the hose with equipment,repressurize the hydraulic system to watch if the leaking problem has been fixed,if not,then we need to change a new hydraulic hose.

Loose the fitting or clamp for both sides of the hydraulic hose very carefully,there may still remain some hydraulic oil in hose,then remove the brokend hose.

Prepare a new hydraulic hose and matched fitting,the new hose should be same type with the broken one,then you could also use the hydraulic hose crimping machine to make the hose and fitting being one hydraulic assembly,before install the new hydraulic hose or assembly,it is a good idea to clear the dirt and debris.When you complex to install the hose,turn on the hydraulic system,test if the problem of leaking still remain,if not,then we have complete our work.

The best way to prevent the problem from happening is use the best hydraulic hose and crimping a good hydraulic assembly.